Home
Fairbanks Morse Magneto Parts
Fairbanks Morse made a lot of mags for a lot of different engines. They got started rather late in the mag business with their first mag being the type R rotary mag for their type Z engines. Though I don't list them here, I can get the coils rewound and will be making leadout towers shortly. Gears will also be coming soon.
Before the type R, FM bought a number of different mags, the most popular being the AB33 & the AB34. These were made by American Bosch and are listed here mainly because they were used exclusively on Fairbanks Morse engines. I can get coils rewound, and rebuild condensers for you. I can also make other parts as needed. I cannot get point disks. I can convert DU-4 and other similar ones into AB33, you must send it to me. When installing lead-out towers on AB34 mags, the mounting holes must be slightly elongated. I can also replace bearings on AB33 and AB34 mags. Please inquire for details.
The remainder of the Fairbanks Morse mags were rotary mags with permanent magnets in the rotor (except the flywheel mags.) These mags were used on a wide range of engines and tractors both as original equipment and as aftermarket replacements. Over the years, F-M made many different modelsWhen ordering parts, it is best to give me the actual mag model number from the tag so I can check my parts list. I can get most any part, far more than listed here, so call, e-mail, or write with needs.
Click on one of the following to jump to that section:
Modern Fairbanks-Morse Mag Parts
|
Order number |
Description |
Picture |
Price each |
|
FM010 |
Actuating
arm, AB33, 2 3/4" long |
|
28.00 |
|
FM011 |
Actuating
arm, AB33, 5 1/4" long |
30.00 |
|
|
FM012 |
Actuating
arm, AB33,34, later style, 2 3/4" long |
|
28.00 |
|
FM017 |
Bearing,
AB34 |
|
30.00 |
|
CND10 |
Condenser
rebuild, AB33 or AB34, you send me your armeture
end, I install a new modern-style condenser |
|
25.00 |
|
CLR10 |
Coil
rewind, exchange, AB33, you send me your core |
|
100.00 |
|
CLR11 |
Coil
rewind, exchange, AB34, you send me your core |
|
120.00 |
|
FM018 |
Lead-out
tower, with spring & gasket, AB33, AB34 |
|
28.00 |
|
FM016 |
Gasket
for leadout tower, AB33 |
|
1.50 |
|
FM017 |
Brush
& spring for leadout tower |
|
4.00 |
|
FM027 |
Point
cover, AB33, AB34 |
|
9.00 |
|
FM030 |
Roller,
spring, AB33, AB34 (hardened) |
|
4.00 |
|
FM034 |
Spring,
oscillator, AB33, AB34 |
|
5.00 |
|
Fairbanks Morse Rotary Mags |
|||
|
|
|||
|
FM110 |
Condenser,
FM-J, AXMR2433, use for 4 cylinder mags |
|
8.00 |
|
FM111 |
Condenser,
FM-J, SXY2433, use on 1 and 2 cylinder mags |
10.00 |
|
|
FM154 |
Points,
FM-J, clockwise, R2437 |
|
18.00 |
|
FM155 |
Points,
FM-J, counter-clockwise, S2437 |
|
38.00 |
|
FM156 |
Points,
FM-JV4, FM-JVE4, FM-JVE4B7C, T2437 |
|
54.00 |
|
FM170 |
Coil,
many,mostly multi cyl, R2477C |
|
65.00 |
|
FM171 |
Coil,
many, moslty single cyl,
T2477C |
70.00 |
|
|
FM172 |
Coil,
dual spark, Q2477C |
|
80.00 |
|
FM147 |
Rotor,
FM-J4, M2765 |
|
18.00 |
|
FM149 |
Rotor,
some FM-JE4 & FM-XE4, X2765 |
38.00 |
|
|
FM220 |
Rotor,
FM-J2B6 & others, counter clockwise, used with BX2430 cap, brush spark
distribution, N2765 |
|
Discontinued |
|
FM223 |
Rotor,
FM-J2, counter-clockwise, used with LX2430 cap, jump gap spark distribution,
Q2765 |
|
Discontinued |
|
FM221 |
Rotor,
FM-J2, clockwise, used with LX2430 cap, jump gap spark distribution, R2765 |
40.00 |
|
|
FM185 |
Distrib. Shaft & gear assy., FM-J4, JF2 N5939 |
|
30.00 |
|
FM230 |
Gear,
magnetic rotor (armature), FM-J4, most, F5952 |
|
26.00 |
|
FM126 |
Bearing,
FM most, C5949 |
|
16.00 |
|
FM200 |
Coil
cover, FM-J1, FM-X1, lead-out points up, AX2430 |
|
38.00 |
|
FM201 |
Coil
cover, FM-JF2, FM-J4, CX2430 |
|
48.00 |
|
FM203 |
Coil
cover, FM-J1B2, lead-out points straight out, SX2430 |
|
38.00 |
|
FM181 |
Seal,
bearing, G3861 |
|
2.00 |
|
FM130 |
Gasket
kit, FMJ1,2, GK16 |
|
6.00 |
|
FM131 |
Gasket
kit, FMJ4, others, GK17 |
8.00 |
|
|
FM140 |
Gasket,
cap, FM-J, H2498 |
|
2.00 |
|
FM120 |
Gasket,
FM-J4, B682 |
|
1.50 |
|
FM E Rotary Mags |
|||
|
FM111 |
Condenser,
FM-E most, SXY2433 |
|
10.00 |
|
FM150 |
Points,
FM-E, A2437A most clockwise (also replaces W2437) |
|
18.00 |
|
FM151 |
Points,
FM-E, B2437A, all counter-clockwise (also replaces X2437) |
|
18.00 |
|
FM212 |
Rotor,
FM-E some, Z2765 |
|
36.00 |
|
FM K Rotary Mags |
|||
|
FM110 |
Condenser,
FM-K, AXMR2433 |
|
8.00 |
|
FM157 |
Points,
FM-K, clockwise, P2437 |
|
52.00 |
|
FM158 |
Points,
FM-K, counter-clockwise, Q2437 |
|
36.00 |
|
FM170 |
Coil,
many,mostly multi cyl, R2477C |
|
65.00 |
|
FM126 |
Bearing,
main, driven end, C5949 |
|
16.00 |
|
FM181 |
Seal,
main bearing, G3861 |
|
2.00 |
|
FM195 |
Gasket,
cover, F2498 |
|
3.00 |
|
FM L Series Rotary Mags |
|||
|
FM159 |
Points,
certain mags, Q2437A |
|
70.00 |
|
FM112 |
Condenser,
FM-X, shielded mags, RX2433 |
|
45.00 |
|
|
Coils
and certain other parts are available, call or e-mail for details |
|
|
|
FM P Series Rotary Mags |
|||
|
FM159 |
Points,
FM-P1, FM-PE1, FM-PE1-2, Q2437A |
|
70.00 |
|
FM112 |
Condenser,
RX2433, ask before ordering |
|
45.00 |
|
FM113 |
Condenser,
FM-PE1-2B16B, VX2433 |
|
discontinued |
|
|
Coils
are available but are special order, please call, no sales to aviation
users!!!! |
|
|
|
FM X Rotary Mags |
|||
|
FM110 |
Condenser,
FM-X, AXMR2433, use with 4 cylinder mags |
|
8.00 |
|
FM111 |
Condenser,
FM-X, SXY2433, use with 1 and 2 cylinder mags |
10.00 |
|
|
FM112 |
Condenser,
FM-X, shielded mags, RX2433 |
|
45.00 |
|
FM150 |
Points,
FM-X, A2437A most clockwise (also replaces W2437) |
|
18.00 |
|
FM151 |
Points,
FM-X, B2437A, most counter-clockwise (also replaces X2437) |
|
18.00 |
|
FM170 |
Coil,
many,mostly multi cyl, R2477C |
|
65.00 |
|
FM171 |
Coil,
many, moslty single cyl,
T2477C |
70.00 |
|
|
FM172 |
Coil,
dual spark, Q2477C |
|
80.00 |
|
FM147 |
Rotor,
FM-J4, M2765 |
|
18.00 |
|
FM149 |
Rotor,
some FM-JE4 & FM-XE4, X2765 |
38.00 |
|
|
FM148 |
Rotor,
XE4 & others, X2765X |
62.00 |
|
|
FM222 |
Rotor,
FM-X2B7(D,E,F), FM-XE2B7F, FY2765 |
|
22.00 |
|
FM223 |
Rotor,
FM-OR4, FM-XOR, FM-XR, FM-Z4, used with TX2430 cap, Z2765 |
|
28.00 |
|
FM224 |
Rotor,
FM-X4B7C & others, used with VX2430X cap, M2765X |
|
40.00 |
|
FM225 |
Rotor,
FX-X4B44 for Kohler |
|
24.00 |
|
FM186 |
Distrib. Shaft & gear assy., FM-X4 Y5939 |
|
30.00 |
|
FM187 |
Distrib. Shaft & gear assy., FM-X4, militarized mags, Q5939
(also Q5939X) |
60.00 |
|
|
FM231 |
Gear,
magnetic rotor (armature), FM-X4, most, Q5952 |
|
75.00 |
|
FM126 |
Bearing,
FM most, C5949 |
|
16.00 |
|
FM127 |
Bearing,
bronze, distributor end, press in, most FM-X, A5950A |
|
10.00 |
|
FM128 |
Bearing,
bronze, distributor rotor, press in, D5950C |
|
8.00 |
|
FM129 |
Bearing,
needle/roller, distributor end, certain FM-X & FM-Z, D5949A |
|
discontinued |
|
FM235 |
Bearing
& Point Support Plate, clockwise, multi-cylinder mags with a gear driven
rotor, X4631 |
|
75.00 |
|
FM236 |
Bearing
& Point Support Plate, counter-clockwise, multi-cylinder mags with a gear
driven rotor, Y4631 |
|
90.00 |
|
FM181 |
Seal,
bearing, G3861 |
|
2.00 |
|
FM197 |
Impulse
spring, most, D2565 |
|
20.00 |
|
FM198 |
Impulse
spring, some, E2565 |
30.00 |
|
|
FM245 |
Impulse
pawl, single cylinder, H2566 |
|
12.00 |
|
FM246 |
Impulse
pawl, multi-cylinder, Q2566 |
|
10.00 |
|
FM130 |
Gasket
kit, FMJ1,2, GK16 |
|
6.00 |
|
FM131 |
Gasket
kit, FMJ4, others, GK17 |
8.00 |
|
|
FM142 |
Distributor
cap, FM-J 4 cylinder, C800 |
|
65.00 |
|
FM143 |
Distributor
cap, FM-JV4, FM-XV4, G800 |
65.00 |
|
|
FM144 |
Distributor
cap, certain FM-X4, FM-Z4, W800 |
|
80.00 |
|
FM145 |
Distributor
cap, FM-XF2B7, 2 cylinder, D800 |
|
80.00 |
|
FM146 |
Distributor
cap, FM-Z6, 6 cylinder, Q800 |
|
110.00 |
|
FM200 |
Coil
cover, FM-J1, FM-X1, lead-out points up, AX2430 |
|
38.00 |
|
FM206 |
Coil
cover, FM-X1, lead-out points up and out, BZ2430 |
|
36.00 |
|
FM207 |
Coil
cover, FM-X4, AZ2430 |
|
44.00 |
|
FM202 |
Coil
cover, FM-X1-2B7, 2 cylinder dual-spark, points
straight out, BY2430 |
|
40.00 |
|
FM205 |
Coil
cover/distributor cap, LX2430 |
|
84.00 |
|
FM208 |
Coil
cover, FM-X2B7(D,E) & others, WZ2430 |
|
72.00 |
|
FM209 |
Coil
Cover, FM-X4B44A,B, R2430C |
|
78.00 |
|
FM140 |
Gasket,
cap, FM-J, FM-X, H2498 |
|
2.00 |
|
FM120 |
Gasket,
distributor cap, FM-J4, FM-X4, B682 |
|
1.25 |
|
FM121 |
Gasket,
distributor cap, FM-X6, FM-XR4, D682 |
|
6.50 |
|
FM190 |
Gasket,
mount, FM-J, A4910 |
|
2.00 |
|
FM191 |
Gasket,
mount, SAE, C4910 |
|
1.50 |
|
FM192 |
Gasket,
mount, Wisconsin, D4910 |
|
1.50 |
|
FM163 |
Brush,
E2460B |
|
2.00 |
|
FM164 |
Brush,
F2460B |
|
2.00 |
|
FM180 |
Seal,
G2501 |
|
2.00 |
|
FM Z Rotary Mags |
|||
|
FM110 |
Condenser,
FM-Z, AXMR2433, use with 4 cylinder mags |
|
8.00 |
|
FM111 |
Condenser,
FM-Z, SXY2433, use with 1 and 2 cylinder mags |
10.00 |
|
|
FM150 |
Points,
FM-Z, A2437A most clockwise (also replaces W2437) |
|
18.00 |
|
FM151 |
Points,
FM-Z, B2437A, most counter-clockwise (also replaces X2437) |
|
18.00 |
|
FM223 |
Rotor,
FM-Z most, Z2765 |
|
36.00 |
|
|
many other parts available, call or e-mail with requests |
|
|
|
CND12 |
Condenser
rebuild, you send me your condenser, I install a new modern-style condenser |
|
25.00 |
|
CLR12 |
Coil
rewind, exchange, you send me your complete armature |
|
130.00 |
|
FM020 |
Lead-out
tower, with insert |
|
45.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FM022 |
Cap,
RV-1 |
|
50.00 |
|
CND13 |
Condenser
rebuild, you send me your condenser, I install a new modern-style condenser
in the original case |
|
25.00 |
|
FM170 |
Coil,
RV-1, a substitue that fits very nicely under the
cap. Bend the supplied copper tab so that it touches the brass contact under
the cap |
|
65.00 |
|
FM040 |
Points,
RV-1 |
|
17.00 |
|
BRG02 |
Bearing,
early, type E15, 3 piece take apart |
|
25.00 |
